Overview
Loop a single snare hit and switch from 1981 Gated Snare to 1981 Deep Space. On the same machine, the reflections go from a short burst with a sharp cutoff to a tail that hangs between hits. For a different texture, try 1976 Hall, then 1985 Vintage Origin to hear the 1976 delay network through the later machine’s converters.
Key features
- Five machines model the converters, sample rate and delay network of their year. These range from the grain of a 12-bit converter in 1976 to the clearer 16-bit sound of 1985 and 1986.
- Reverb builds halls and plates. Space sustains a long tail, and Non-Lin shapes a gated burst. Each machine lights the programs it supports.
- Origin runs the 1976 delay network through the converters of the 1985 or 1986 machine.
- Use Decay to set the tail length. On machines with Predelay, leave a gap before the reflections so the first word of a vocal stays clear.
- The 1985 machine lets you move the early reflections across the stereo field and change how quickly they arrive.
- The live display shows the input level, converter clipping and energy in the four delay loops as the tail fades.
- Input drives the converter, Output trims the reverb level and Mix blends it with the dry signal.
How to use it
Find Remit under Effects in Reason’s browser and put it on a send. Turn Mix fully wet and play a drum loop through the opening patch, 1976 Hall. Try the Machine keys, then adjust Decay. If CLIP lights, turn Input down.
Tip: On the 1976 or 1985 machine, connect Ch III and IV to a second stereo mixer channel. Bring up that pair alongside Ch I and II to hear the rear of the hall.
What’s included
- Remit Digital Reverberator Rack Extension
- 20 factory patches, including 1976 Hall, 1979 Compact Room and 1981 Gated Snare
- Download size: about 31 MB
- PDF user guide
Specifications
- Device type: Effect (Reverb)
- Inputs: left and right stereo pair with mono input support
- Outputs: main stereo pair (Ch I and II) and a second stereo pair (Ch III and IV) on the 1976 and 1985 machines
- CV inputs and outputs: none
- Every knob supports automation. Machine and Program are saved with patches and can be mapped with Remote.
Requirements
Reason 14 or later.
Version history
0.4.0: Initial release