Spindle Player Merger & Splitter
Player Merger/Splitter
- • 1-wire fully polyphonic 8:1 merge & 1:8 split
- • Sample-accurate stack sync & MIDI Out routing
- • Auto-detect CV inputs & selectable CV/Gate outputs
Spindle is the missing third Spider for your Player devices, bringing 1-wire polyphonic 8:1 merging, 1:8 splitting, and bidirectional analog CV conversion to a compact 1U utility. Requires Reason 10.1 or later.
Overview
Spindle is the missing third Spider for your Player devices. While Reason’s built-in Spider Audio and Spider CV units split and merge audio and control voltages, Spindle brings fully polyphonic splitting, merging, and analog CV conversion to Player stacks in a compact 1U utility.
Using a single rear patch cable (SilkLink), you can split one Player stack across up to 8 downstream instruments (or Player stacks) with unlimited polyphony and sample-accurate synchronization, merge up to 8 independent Player stacks (or other SilkLink devices or MIDI/sequencer data) into one instrument, or translate both ways between Players and standard analog Note + Gate CV. You can even attach it to an instrument without any other Players to split or merge notes from your MIDI controller or sequencer lane.
One-Wire Polyphony for Player Stacks and Beyond (SilkLink)
Standard Reason CV cables carry a single monophonic voltage (a single pitch or gate). When you patch a rear output set to Silk into another Spindle’s rear input, that single cable upgrades into a high-speed SilkLink digital trunk carrying:
- Unlimited Polyphony with note-on velocity and release velocity (up to 3,000 notes/sec at 48 kHz and 6,000 notes/sec at 96 kHz via multi-note chord packing).
- Pitch Bend (14-bit channel pitch bend plus per-note MPE pitch bend).
- Aftertouch (monophonic Channel Pressure and per-note Polyphonic Key Pressure).
- Full Controller & Modulation Routing across all 128 MIDI CCs, per-note Timbre (CC 74), Program Change, microtonal cent detune, 16-channel multi-timbral notes, and a 32-slot 14-bit high-resolution modulation bus.
- Scale Metadata & Transport Sync (root key, 12-bit scale mask, and sample-accurate step sequencer sync).
All Silk outputs transmit the exact same stream simultaneously, and continuous controller sweeps never block or delay your note-ons and note-offs.
Key features
- Split Across Separate Tracks: Drive a layered lead, pad, and sub-bass across separate tracks from a single Scales & Chords or Arpeggiator stack (or controller/sequencer lane) without duplicating tracks or copy-pasting Player chains.
- Play Synths & External MIDI Together: Reason’s MIDI Out acts as an Instrument, so a Player stack normally can’t drive both an in-rack synth and external hardware on the same track. Spindle lets you play your synth and route the exact same polyphonic performance to a MIDI Out rack device over one cable.
- 8-to-1 Polyphonic Merging with Live Mutes: Combine basslines, chord stabs, and top-line arpeggios from up to 8 separate instruments, Player stacks, or CV sequencers into one destination synth or drum kit, with front-panel mute buttons for live arrangement drops.
- 4-Voice Polyphonic Analog CV: Turn any polyphonic chord into 1–4 independent analog Note + Gate CV voices (CV Poly) to play monophonic synths, modular Rack Extensions, or Eurorack modules as a 4-voice polysynth.
- Auto-Detect Analog CV-to-Player Conversion: Patch standard analog Note + Gate CV from a Matrix Pattern Sequencer or RPG-8 into any rear input pair. Spindle auto-detects the CV pair and converts it into Player notes for downstream Players and instruments.
- Sample-Accurate Stack Sync: Align local vertical Player output with remote SilkLink destinations on the exact same audio sample (0.00 ms skew).
- Live Dynamic Routing Scope: Color-coded S-curve signal map showing active SilkLink (Cyan), CV (Amber), and Thru (Green) routing at 0% idle CPU.
How to use it
Spindle’s 1U Player chassis reads left-to-right on both sides of the rack.
1. Power & 3-State STACK Switch (Left Bay)
- Power (On / Off): Master Player enable. Switching Off cleanly releases any active rear-input or CV voices and passes upstream Player notes straight down to the local instrument.
- Stack = Sync: Aligns vertical output to the local instrument with active rear Silk outputs while preserving exact sub-batch sample offsets. Your local instrument and all remote SilkLink instruments fire on the exact same audio sample (0.00 ms skew, zero comb-filtering on layered drums or unison synths). When no rear Silk outputs are connected, Sync runs equivalently to Thru.
- Stack = Thru: Passes upstream Player notes straight down to the local instrument with 0 samples of delay regardless of rear cabling, while simultaneously feeding the merger, scope, and rear outputs.
- Stack = Mute: Silences all vertical note output to the instrument directly below Spindle, while continuing to merge and route all active sources into the Dynamic Routing Scope and rear outputs (OUT 1–8).
2. 8-to-1 Auto-Detect Input Merger (In 1–8)
- SilkLink Auto-Lock (S): Patching a SilkLink cable into any rear input (In 1 through In 8) automatically activates the 1-wire polyphonic stream and lights its front and rear S badge in cyan. Every jack accepts an independent SilkLink trunk so you can merge up to 8 polyphonic Player chains into one instrument.
- Analog Note + Gate CV Fallback (N / G): Patching an analog CV cable into an odd/even pair treats odd jacks (1, 3, 5, 7) as Pitch CV and even jacks (2, 4, 6, 8) as velocity-sensitive Gate CV. A 2-pass cross-pair matcher automatically pairs orphaned Note and Gate cables across adjacent jacks, while ignoring random bipolar LFOs and static knobs.
- Per-Channel Mute Buttons (On / Off): Click any of the 8 channel buttons (or automate via MIDI CC 20–27 or Combinator buttons) to mute or enable that input on the fly. Muting an active channel immediately sends clean note-offs for notes held by that source without cutting off notes held by other channels.
3. Dynamic Routing Scope (Center Display)
- The Live S-Curve Signal Map draws active input curves on the left, vertical Player Stack flow at top and bottom center, and active output curves on the right, color-coded in Cyan (SilkLink), Amber (CV), and Green (Thru).
- Traces stay lit for the full length of sustained chords and hold briefly on ultra-short staccato hits so fast arpeggios and drum gates stay easy to read, parking at 0% idle CPU when notes are at rest.
4. 1-to-8 Dual-Mode Output Splitter (Out 1/2 – 7/8)
Four wide mode buttons (duplicated on both the front and rear panels so you don’t have to flip the rack to switch modes) independently configure each output pair:
- Silk (Cyan, Default): Both jacks in the pair output identical 1-wire SilkLink streams (up to 8 SilkLink outputs across all four pairs, daisy-chainable across additional Spindles for 15+ destinations).
- Poly (Amber): Assigns the pair (Odd = Note CV, Even = Velocity Gate CV) to Spindle’s Polyphonic Analog CV Voice Pool. Set 1, 2, 3, or all 4 pairs to Poly to allocate 1-to-4 chord voices with held-pitch release tails (zero voice-hopping), oldest-voice stealing with held-note backfill, and live +/-2 semitone Pitch Bend.
- Last (Amber): Configures the pair as an independent Monophonic Last-Note Priority Note + Gate CV output (with live +/-2 semitone Pitch Bend and smooth trill fallback when releasing held keys).
- Off (Grey): Mutes both jacks in the pair and releases any voices allocated to them.
What’s included
- Spindle Player Merger & Splitter Rack Extension (1U Note Player)
- Built-in SilkLink v1 one-wire polyphonic routing protocol
- Full Reason Remote and Combinator Programmer mappings
Specifications
- Device type: Player
- Device Format: 1U Note Player Rack Extension
- One-Wire Protocol: Open SilkLink v1 (sign-split multi-exponent 29-bit IEEE-754 floating-point framing over standard Reason CV cables)
- Peak Note Throughput: 2,756 notes/sec at 44.1 kHz; 3,000 notes/sec at 48 kHz; 6,000 notes/sec at 96 kHz; 12,000 notes/sec at 192 kHz
- Sub-Batch Timing & Latency: Sample-accurate (exact 0–63 sub-batch sample offset preserved); 0 samples latency in Thru mode; 64 samples (1 Reason CV block) in Sync mode for 0.00 ms local/remote stack alignment
- Rear Inputs (8 Jacks + Vertical Stack): 8 auto-detecting CV inputs accepting SilkLink one-wire polyphony on any jack or up to 4 analog Note + Velocity Gate CV pairs with 2-pass cross-pair matching + upstream vertical Player stack input
- Rear Outputs (8 Jacks + Vertical Stack): 8 CV outputs grouped into 4 front/rear-switchable pairs (Silk dual one-wire broadcast, Poly 1-to-4 voice polyphonic Note + Gate CV pool, Last monophonic last-note priority Note + Gate CV, Off) + 3-state vertical Player stack output (Sync, Thru, Mute)
- Analog Pitch & Gate Standard: Odd jacks carry linear 1V/Oct Pitch CV (0.0–1.0 = MIDI notes 0–127 plus live +/-2 semitone Pitch Bend); Even jacks carry velocity-scaled Gate CV (0.0–1.0 = Velocity 0–127 with Schmitt hysteresis)
- Event Queue Architecture: 256-slot two-tier NoteOff-safe priority queue (discrete note, pedal, and scale events leapfrog in-place coalescing continuous controllers)
- Loop & Fault Protection: Connect-time magic handshake, deterministic TX-window + SenderId self-loop and multi-hop ring suppression, live mode-switch unlock pulse, and 18-batch self-healing 128-note audit with 0 Hz idle/sustained motherboard quiescence
- Remote & MIDI Automation: Full Reason Remote, Combinator Programmer, and MIDI CC (CC 14–15, CC 20–31) implementation plus read-only note, link-lock, and scale telemetry
- Supported Sample Rates: 22.05 kHz to 192.0 kHz
Requirements
- Reason 10.1 or later
Version history
- 1.0.5: Initial release.
Version